Banieren dubbelzijdig
Double sided banners
Have your banners printed on both sides at Stuntvlaggen! You can use this type of flag for poles with or without a banner holder. Available in various sizes. The banners consist of 2 layers of 115 gram gloss polyester with a blockout layer in between so that the flag does not shine through. So you can upload a file for the front and back of the flag. This does not have to be the same file. Due to the 3 layers of fabric, the flag is heavier and more sensitive to wear. We only use UV and water resistant inks.
✔ Upload 2 files to the shopping cart
✔ With or without open hem for banner holder
✔ Printed on the front and back
✔ Top quality flag fabric
✔ Full color from 1 piece
✔ Shipping costs from €6.95 excl. VAT
Information
* Indicated delivery times are based on 1 day after shipment, according to the carrier this is a 95% certainty in the Netherlands. In neighboring countries this is often 1 day longer. We have no influence on the carrier's delivery and are also not liable for late delivery by the carrier.
Limitation:
- banners smaller than 30cm are practically impossible, ask about our table flags.
Format
Our banners are available in any size, but we have selected the most common sizes of banners and high-format flags for you. For double-sided facade flags or mast flags, click on the 'Flags double-sided' page. If your size is not listed, click on 'own size' to enter your own size and continue the ordering process.
Full color print
The double-sided banners are printed in full colour, with this digital printing process it is possible to print photos, color gradients and shadows. The color transfer is not important, because the banners consist of 2 layers of gloss polyester with a blockout layer in between. This way the banner does not shine through and the banner can be printed on both sides with a different image if necessary.
Materials
The banners consist of 2 layers of standard flag fabric 115 grms gloss polyester with a bloucous layer in between. The 3-layer fabric is somewhat heavier and therefore more subject to wear and tear due to weather influences.
Finish
You can choose to finish your banner with or without a horizontal tunnel at the top. This tunnel or open seam is 7cm measured flat and is intended to slide over the banner holder. If you do not have a banner holder or horizontal rod on the mast, choose a finish without a tunnel to hoist the banner onto the mast like a normal mast flag. If you would like a banner holder on your mast, take a look at our 'banieruithouder sets' or 'hoistable banner holders'.
Upload flag design
Upload the front and back for the banner and check your files. You can upload the same file for the front and back of the banner or choose 2 different files. Due to the blockout layer between the canvases, the image will not shine through. We always check your files for global formatting errors. We assume that you have checked your file properly. If you do not have a ready-made file, you can also send your logo or image to us via WeTransfer.
At Stuntvlaggen you are assured of the cheapest printed banners with the best quality and service. If you have any questions, you can always contact us and we will be happy to tell you everything about printing your flag at Stuntvlaggen.nl
Working drawings
Delivery specifications
- File 1cm larger all around for the bleed.
- Save as PDF, preferably PDF/X-1a
- PMS colors may remain
- RGB may remain, but we will return it to CMYKOV
- Resolution lower than 25 dpi is low
- Resolution greater than 40 dpi is good.
- Resolution greater than 100 dpi is undesirable due to files that are too heavy.