Flags double sided
Print flags on both sides
Easily order your cheap flags.
Have your banners and flags printed on both sides at Stuntvlaggen! You can use this type of flag with a loop and cord for a facade pole or with snap hooks for a flagpole. The flags consist of 2 layers of 115 gram gloss polyester with a blockout layer in between so that the flag is not transparent. So you can upload a file for the front and back of the flag. This does not have to be the same file. Due to the 3 layers of fabric, the flag is heavier and more sensitive to wear. We only use UV and water resistant inks.
✔ Upload 2 files to the shopping cart
✔ Finished with loop and cord or with snap hooks
✔ Printed on the front and back
✔ Top quality flag fabric
✔ Full color from 1 piece
✔ Shipping costs from €6.95 excl. VAT
* Indicated delivery times are based on 1 day after shipment, according to the carrier this is a 95% certainty in the Netherlands. In neighboring countries this is often 1 day longer. We have no influence on the carrier's delivery and are also not liable for late delivery by the carrier.
Limitation:
- flags smaller than 30cm are practically impossible, ask about our table flags.
Format
Our flags are available in any size, but we have selected the most common sizes of the horizontal facade flag and pole flag for you. For double-sided high-format flags or banners, click on the 'Banners double-sided' page. If your size is not listed, click on 'own size' to enter your own size and continue the ordering process.
Full color print
The double-sided flags are printed in full colour, with this digital printing process it is possible to print photos, color gradients and shadows. The color transfer is not important, because the flags consist of 2 layers of gloss polyester with a blockout layer in between. This way the flag does not shine through and the flag can be printed on both sides with a different image if necessary.
Materials
The flags consist of 2 layers of standard flag fabric 115 grms gloss polyester with a bloucout layer in between. The 3-layer fabric is a bit heavier and therefore more subject to wear and tear due to weather influences.
Finish
You can choose to finish your flag as a horizontal facade flag or as a horizontal pole flag. Choose the finish ‘with loop and cord’ for attachment to a flagpole on the facade or ‘with hooks’ for hoisting on a flagpole.
Upload flag design
Upload the front and back for the flag and check your files. You can upload the same file for the front and back of the flag or choose 2 different files. Due to the blockout layer between the canvases, the image will not shine through. We always check your files for global formatting errors. We assume that you have checked your file properly. If you do not have a ready-made file, you can also send your logo or image to us via WeTransfer.
At Stuntvlaggen you are assured of the cheapest printed flags with the best quality and service. If you have any questions, you can always contact us and we will be happy to tell you everything about printing your flag at Stuntvlaggen.nl
